Used Striko Westofen Aluminum Furnaces

Picture of Used Striko Aluminum Melting Furnace

We buy and sell used striko furnaces. Available from stock. Quick delivery.

    • Used Striko Westofen furnaces are something we buy, sell, inspect, and deliver. We are an authorised dealer for Striko Westofen furnaces. We buy and sell all brands of aluminum & melting holding furnaces, magnesium melting & holding furnaces and zinc melting & holding furnaces.
    • Aluminum and magnesium melting and holding furnaces are made by Striko Westofen. Striko manufactures a comprehensive set of tilting and stationary melting furnaces. The StrikoMelter furnaces are a whole line of high efficiency melting furnaces in the shaft (stack) design. This furnace provide expertise & technology for the highest energy efficiency.
    • Striko’s MH II-T (tilting furnace), MH II B (stationary with metal pump well), MHS, and the WHS-T tilting big batch capacity furnace are the most popular versions. The Westofen ProDos furnaces from Striko’s, which have been used in thousands of applications worldwide, are another one of their well-known products.
    • There are eight standard variants of Striko Westofen furnaces, including the 450S, 650S/SL, 900 S/SL, 1700S, 2300 S/SB, 3100S, and 4100 S.
    • We provide used gas aluminium melting and holding furnaces, used electric aluminium melting and holding furnaces, used foundry melting furnaces in a range of sizes, as well as a variety of options and brands, including Shaefer, Striko, Lindberg, Thermtronix, Dynamo Furnaces, and many more. Our high-performance used melting furnaces provide a quick and convenient method of adjusting the operating cycle to maintain maximum productivity.

Techmire Die Casting Machines For Sale

We Buy and Sell Techmire Multi-Slide Die Casting Machines.

  • Why not think about a reliable used Techmire die casting machine when it’s time to update, rebuild, refurbish, re-manufacture, replace, or increase die casting capacity to your facility? When comparing the price to modify the hydraulics, PLC controller, and electronics on an existing machine, purchasing a used Techmire equipment from us is frequently far more affordable. Frequently, our costs are less expensive than those at auction. However, we can provide you with a low-cost machine core that you may have rebuilt to your exact specifications if you want a fully rebuilt die casting machine with cutting-edge controls. This enables you to continue using your present machine for production while the supplied core is rebuilt. In order to further lower your costs, we are also pleased to accept your used machine in exchange.
  • Please contact us if you need replacement parts for your Techmire die cast machine if you are missing an owner’s manuals, hydraulic schematics, electrical schematics, mechanical drawings, PLC ladder logic programme, or other machine data.

After Sales Service for Techmire Used Die Casting Machine

  • For all BETA used machines, we can provide contact to local technicians who can service or rebuild your equipment.
  • A few hundred customers have been served globally by BETA throughout its more than 25 years of operation. All of them have come to trust us.

Your #1 Source to Sell Used Die Cast Machinery

Where Can I sell My Used Die Cast Machinery?

For many years, we have been buying and selling second-hand material handling and metalworking equipment. If you have any machine you’d want to sell, please get in touch with us. We welcome the opportunity to bid on your surplus machine tools.

For your piece of mind, we do a power-up inspection on every equipment and provide a 30-Day Guarantee on machines bought from our warehouse.

Plus, we offer financing and leasing Services, to help you buy the equipment you need at a small monthly fee.

Quick & Easy Option To Sell With Us

Select one of our 2 quick and easy options to sell your die casting machine.

1) Direct Purchase – Looking for a buyer? You just found one!

2) Trade-In – Trade in your used equipment for a new model.

DIRECT PURCHASE

Whether you’re looking to purchase from us or not, we’re always looking to buy die cast machinery of heavy equipment.

  • Are you curious about the cost of your equipment? We offer quick and cost-free evaluations.
  • Deal with our reliable team and receive the best pricing.
  • Leave with a smile on your face and money in your pocket.
  • whether you are looking to sell a single machine or your complete inventory, a single component or your full power system, we are interested!

TRADE-IN

Would you like to buy a die casting machine? Get a fair rate for the equipment you’re trading in.

  • Benefit from a free evaluation to get the best deal on your equipment.
  • Count on our specialists to identify the appropriate equipment to meet your demands.
  • When you buy new equipment, you can trade in your old one.

Please provide your contact information and tell us a little about your needs for selling used industrial equipment and assets. We will contact you within 24 hours. If you prefer you can always contact us directly at. +1 (519) 621-0799 or sales@betadiecasting.com

Where Should You Buy a Used Die Casting Machine?

Die Casting Machine

Which is the Right Brand?

There are many manufacturers of die casting machines in the world. However, our many years of experience have shown, over and over again, that the best quality machines are recognized brand names manufacturers and originate from North America, Europe and Japan. As well, do not be too focused on the age of the machine. Due to their construction, and unlike most machines, die casting machines last a very long time. In addition, the technology has not changed too much over the years. Unless you plan to make very high-end castings, most well-made used machines should be sufficient for most applications. There are some good deals to be had slightly older machines.

What is a Realistic Budget?

 While of course, everyone would like to spend the least amount of money on capital equipment such as a die casting machine, generally speaking, you can use the follow basic guidelines when it comes to comparing prices of new and used machines. The reason for the price range of second-hand machines is the age and the condition.

 

Where Should You Buy a Used Machine?

When considering the purchase of a used machine, ultimately you have two basic choices.

Buying Privately

The first choice is to buy privately from a die casting company. However, when you think about it, this choice is very often limited, actually more so than you would expect. First of all, by calling from die caster to die caster it is hard to locate the right machine for your needs. Secondly, there are used machinery dealers like my company, in which it is their “business” to call and keep in contact with all die casters on a regular bases and find out if they have machines for sale. For example, our company is in touch with just about every die caster on the planet. When we do find a good machine, we snatch up before it even sees daylight. Therefore, your chances of finding a “good machine” just “phoning around” becomes very remote.

Buying from a Dealer

The second choice you have, is to buy from a die casting machine dealer. There are two types of dealers in the world – stocking and non-stocking. No-stocking dealers accumulate lists of machines available for sale. They offer these for sale to everyone and they usually make about 10% as a selling commission from the owner of the machine. There are 3 problems with this type of business model:

  1. Non-stocking dealers sell machines that they have not purchased with their own money. As such, they take no responsibility for these machines. They basically “sell and run”.
  2. Non-stocking dealers have no stock on hand and so they can “disappear” very quickly. They have no big, heavy machines to move which takes time, effort and money.
  3. Non-stocking dealers offer machines that a stocking dealer like my company already passed up or refused to purchase. When we pass on a machine there must be a very good reason. Non-stocking dealers usually offer the “leftovers” after stocking dealers pick over the good ones.

Click Here to View Article

 

How to Select and Buy a Die Casting Machine

Die Casting Explained

Die Casting Machine

In the die casting process, a mold (called the die) is required. The die is constructed from very high-quality steel specially made for dies. The dies are reusable and are made of two halves. During the process of die casting, molten metal is injected into the closed die under very high pressure through a relatively small hole in one half of the die. When the molten metal has solidified sufficiently, the two parts of the die are opened to expose the actual casting inside. The casting is then removed from the die, cooled further and then finally trimmed. The trimming separates the gates and runners from the casting. The gates and runners are incorporated into the die design as a way to distribute molten metal to the various parts of the die. The trimmed gates and runners are then usually re-melted with new metal also being added. After trimming, further operations can be performed such as drilling and tapping, powder coating and assembly of finished components, etc.



How to Select and Buy a Die Casting Machine

There are many things to take under consideration when buying a die casting machine. This section has been designed to simplify the process of sifting through all the options and selecting the right machine for your needs.


New or SecondHand?

This is the age-old question that most people have. However, most people do not realize that when it comes to die casting machines (as with many other products), manufacturers of these machines produce several “export versions” depending on which “region” of the world they will be sold to. For example, die casting machines produced for the North American market will vary greatly in the quality of materials and technical capabilities when compared to machines produced for “developing” countries. The reality of the matter is that the North American market is much more “mature” and generally speaking has much greater requirements and expectations than other developing markets do. In addition, the level of sophistication, the product technology and budgets for equipment acquisition is greater as well. As such, many die casting machine manufacturers who have been relatively successful in producing machines for developing counties have had almost NO success in developed countries like North America, Europe and other developed markets. In the world market, these machines have become known as “disposable” machines (possibly the term came from disposable shavers). Whereas a machine made in North America or Europe can be rebuilt many times over and over due to superior quality steel, such disposable machines have a very short lifespan of only a few years. After that, it is very hard, if not impossible, to rebuild them properly since the quality of the metal is very poor.

Click Here to View Article

Which Die Casting Machine is the Right Size for Your Project?

Which Size is Right for You?

Die casting machines are classified based on locking tonnage. For example, an 800-ton machine has a locking tonnage of 800 tons. Machine specifications vary from brand to brand and even sometimes from year to year. The following chart shows some basic average specifications gathered from several brands over a period of time. Of course, some manufacturers have produced sizes of machines which fall in between the sizes shown below (for example 500 ton) however, the chart is just for basic reference. Each machine size has a flexible shot range (low and high). The shot range can be switched by changing the diameter of the shot sleeve and plunger hence the shot weight below shows a range that is usually possible with each size of machine. A small number of machines larger than 2500 ton have been manufactured, however these are very rare and extremely expensive. Since a die casting machine is selected based on a combination of die size and shot weight, the following tables show some basic guidelines in selecting the correct size of machine for your needs. The “distance between tie bars” is the maximum size of die that will fit into the machine. The die can be single cavity or multiple cavities.



Which is the Right Size for Your Specific Project?

Most die casting projects fall into one of these two categories. This is a simplified explanation, but it covers most projects you will encounter. This table explains how to find the right machine for a specific project.

Detailed image of Used Cold Chamber Die Casting Machine


What is the Estimated Production Output?

This question is a somewhat more complicated question to answer. But there are guidelines which help greatly. Most die casting machine manufacturers (not all) provide “dry cycle” times for their machines. A dry cycle is the amount of time needed for the machine to perform the whole casting process from bringing to end WITHOUT molten metal being added and WITHOUT cooling time of the casting. Generally speaking, the larger the machine the slower the dry cycle time. The reason for this is that larger castings are made on larger machines. The smaller the casting, the less time it needs to solidify and so the “cooling time” (also known as set time in some parts of the world) become less of a factor. With very small castings it is not a factor at all. It all depends on the casting size and weight. It is not possible for die casting machine manufacturers to give figures for “actual cycle” time without sufficient information about each proposed casting and the number of cavities in the die. However, these figures are obtainable from either a die maker or by using “die casting simulation software” and vary greatly from project to project. Such figures are important because they will tell you how much time it would take for the casting(s) to solidify in the cavity(s) after injection and before the machine can open the die and the casting(s) can be removed. So, as you can see, at best, die casting machine manufactures can only provide dry cycle times. To calculate the “actual cycle” time you will need to add “cooling time” to the dry cycle time provided by the machine manufacturer. Here is a simple way to calculate “Estimated Production Output” using only dry cycle times, (but be sure to add “cooling time” to get a “Final Production Output” figure).

Examples:

The following examples are based on a die casting machine

which has a 4 second dry cycle. Keep in mind this is only

“theoretical” and does NOT include “cooling time”.

ESTIMATED PRODUCTION OUTPUT CALCULATION (Dry Cycle) – SINGLE CAVITY DIE

60 sec. (1 min) divided by 4 sec. = 15 castings per minute

15 x 60 minutes = 900 castings per hour

900 x 8 hours = 7,200 castings per 8-hour work day

ESTIMATED PRODUCTION OUTPUT CALCULATION (Dry Cycle) – 4 CAVITY DIE

60 sec. (1 min) divided by 4 sec. = 60 castings per minute

60 x 60 minutes = 3,600 castings per hour

3,600 x 8 hours = 28,800 castings per 8-hour work day

Click Here to View Article

High Pressure Die Casting Machine Types

Die Casting Machine

High Pressure Die Casting Machine Types.

There are 3 basic types of high pressure die casting machines.

1) Cold Chamber Used primarily for aluminum castings (occasionally specialized machines for brass and magnesium)

Cold Chamber Die Casting Machine For Aluminum
Cold Chamber Die Casting Machine For Aluminum

2) Hot Chamber Used primarily for zinc and lead (occasionally specialized machines for brass and magnesium castings)

Hot Chamber Die Casting Machine For Zinc
Hot Chamber Die Casting Machine For Zinc

3) Multi-Slide Used for zinc (occasionally specialized machines for magnesium castings)

Multi-Slide Hot Chamber Die Casting Machine For Zinc
Multi-Slide Hot Chamber Die Casting Machine For Zinc

Click Here to View Article

Section 179 and the Huge Tax Deduction

To take the deduction for tax year 2019, the equipment must be financed or purchased and put into service between January 1, 2019 and the end of the day on December 31, 2019.  To qualify the machines and equipment must be purchased before the end of 2019. We have machines in stock and ready to ship so you can take advantage of this tremendous offer. Click Here for More Details

Beta Die Casting Equipment has partnered with Direct Capital to offer leasing and financing options for clients located within North America. For more than 20 years, Direct Capital has been providing small and mid-sized businesses with fast and easy access to the capital they need to grow and prosper. With a blazing fast online lending platform that delivers 30-day to 7-year financing at competitive prices, Direct Capital has lent $2.25 billion to over 80,000 businesses across a multitude of industries. Calculate your Leasing Options with Direct Capital

Low Cost Leasing or Financing is a Win-Win Option Low monthly payments allow you to have the machines you need NOW without having to wait.

What Are the Benefits? Both leasing and financing dramatically reduce your out-of-pocket expense. Machine ownership is reduced to small monthly payments which are easy to handle and allow you to use your capital to grow your business.

Some Advantages of Leasing vs. Buying:

Manage Budget Concerns: Budget restrictions can limit your ability to invest in newer technology and equipment. Leasing gives you the ability to leverage your buying power while still maintaining budgetary obligations.

Tax Advantages: Payments on leased technology and equipment can often be treated as a 100% pre-tax business expense. while cash purchases are made with after tax dollars.

Avoid Obsolescence: When you finance equipment or technology, your risk of getting caught with obsolete hardware is not a concern because you can upgrade or add-on as your business changes.

Retain Capital Strength: Companies average a 12% return on every $1 of capital retained in the business (e.g. advertising, technology. Therefore, companies should retain cash for opportunities or emergencies by leasing technology and equipment.