Used QPC Hot Oil Temperature Control Unit #4459
Description
:2006
:QPC
:H0 2220 B24
:Oil
:2
:24 kW
:450 F
:50 F
:4459
:Beta Warehouse Canada
:
AVAILABLE
:
Request Quote$3,500
Specifications | Metric show Imperial | Imperial show Metric |
Heater (per zone) | 24 kW | 24 kW |
Pump Power | 1.5 kW | 2 hp |
Temperature (max) | 232.2 C | 450 F |
Temperature (min) | 10 C | 50 F |
General |
ADDITIONAL SPECIFICATIONS
- Positive displacement pump with internal bypass set at 100 PSI, belt driven by a 2 HP Motor
- 1" Inlet and Outlet
- Gate valves installed on to and from process lines
- Purge system to remove trapped air and vapor from fluid during start-up
- 9 gallon reservoir with low level indicator
- 6.7 ft2 U-tube heat exchanger
- Process pressure Gage
- 24 kW Incoloy sheathed immersion heater, flanged and vertically mounted
- Pressure switch prevents running of unit without pressurization of system
- Safety thermostat for shut-down of element on over-temperature condition
- Heater electrically interlocked to prevent operating if pump not running
- 1/2" drain connection
CONTROL
- NEMA 12 Electrical Enclosure with branch fusing
- Full load amps: 60 at 480 Volts
- 1/16 DIN microprocessor based temperature controller
- Control Voltage 120V
AVAILABILITY AND TERMS
- Machine is ready for inspection and/or shipping
- Technical data without obligation – subject to prior sale
- Specifications and location are subject to change without notice
This Temperature Controllers model H0 2220 B24 is manufactured by QPC. Features include:
Hour Meter, Oil Flow Switch, Positive Displacement Pump with Forward/Reverse Feature.
This machine reference #4459 Temperature Controllers is currently located at our Beta Die Casting Equipment warehouse and is ready for inspection and shipping.
Product Overview
Temperature Control Units
Features
- Machine Manuals
- Easy To Use
- TCU
- Easy To Use
- Machine Manuals