Used Dynamo 1100 Lbs Gas Melting and Holding Furnace #4607
Description
Specifications | Metric show Imperial | Imperial show Metric |
Melting Rate | 149.7 kg/h | 330 lbs/h |
Holding Capacity | 499 kg | 1100 lbs |
Fuel Type | Gas | Gas |
Crucible Diameter | 711.2 mm | 28 inch |
General | ||
Additional Specifications |
- Energy Rating: 11,897,000 BTU/hr
- Bath Temperature (min - max): 0 - 1560 °F
- Rated Power (melting burner): 793,133 BTU/h or 200,000 kCal/h
- Rated Power (holding burner): 594,850 BTU/h or 150,000 kCal/h
- Gas Pressure Requirement: 0.7 PSI or 5 KPa
- Gas Consumption (per ton of alum): 2500 Cf or 70 Cm
- Furnace Wall Temperature: ≤ 86F or ≤ 30C
- Dipwell Height: 42” or 1650 mm
- Dipwell Size (W X D): 23” x 19.5” or 590 x 495 mm
- Furnace Size (L x W x H): 142″ x 71″ x 110″ or 3600 x 1800 x 2800 mm
- Allen Bradly PLC and HMI control system
- Siemens PLC and HMI control system
- Omron PLC and HMI control system
- Cleanout door on right side
- PLC and HMI color touch screen with graphics and die setup memory
- Advance PLC control which is easy to learn and operate
- Advanced burner system which reduces generation of oxides
- Charging door on back
- Cleanout door on left side
- Dual temperature control (melting and holding burners)
- Fully automatic operation
- High quality cast refractory lining
- High thermal efficiency
- Large charging rear door
- Large side maintenance door
- Low metal burn rate of less than 1.5%
- Solid frame structure which is easy to clean and maintain
- Machine is ready for inspection and/or shipping
- Technical data without obligation – subject to prior sale
- Specifications and location are subject to change without notice
This Furnace model GM-D-1100 is manufactured by Dynamo. Features include:
Advance PLC control which is easy to learn and operate, Advanced burner system which reduces generation of oxides, Charging door on back, Cleanout door on left side, Dual temperature control (melting and holding burners), Fully automatic operation, High quality cast refractory lining, High thermal efficiency, Large charging rear door, Large side maintenance door, Low metal burn rate of less than 1.5%, Solid frame structure which is easy to clean and maintain, Temperature alarm, Temperature control accuracy within 10° C.
This machine reference #4607 Furnace is currently located at our Beta Die Casting Equipment warehouse and is ready for inspection and shipping.
Gas Furnace
- Machine Manuals
- PLC Control
- Touch Screen
- Remote Diag
- Furnaces
- 90 Tilting
- Aluminum
- Easy To Use
- Extra Efficient
- Gas
- Machine Manuals
- PLC Control
- Remote Diag
- Touch Screen