• Positive displacement pump with internal bypass set at 100 PSI, belt driven by a 2 HP Motor
•  1" Inlet and Outlet
• Gate valves installed on to and from process lines
• Purge system to remove trapped air and vapor from fluid during start-up
• 9 gallon reservoir with low level indicator
• 6.7 ft² U-tube heat exchanger
• Process pressure Gage
• 24 kW Incoloy sheathed immersion heater, flanged and vertically mounted
• Pressure switch prevents running of unit without pressurization of system
• Safety thermostat for shut-down of element on over-temperature condition
• Heater electrically interlocked to prevent operating if pump not running
• 1/2" drain connection

• NEMA 12 Electrical Enclosure with branch fusing
• Full load amps: 60 at 480 Volts
• 1/16 DIN microprocessor based temperature controller
• Control Voltage 120V

• Machine is ready for inspection and/or shipping
• Technical data without obligation – subject to prior sale
• Specifications and location are subject to change without notice

Used QPC Hot Oil Temperature Control Unit

This Temperature controller unit is manufactured by QPC. This temperature controller unit made by QPC reference #4460 is currently located at our Canada Beta Die Casting Equipment warehouse and is ready for inspection and shipping.

For a very long time, Beta Die Casting Equipment has set the norm for top-notch used circling fluid temperature control units and heat transfer oil systems. Through the advancement of used hot oil units and used hot water units throughout the industry, we've made exceptional arrangements to have these used units available. Beta Die Casting has reliably shown its capacity to anticipate the developing requirements of clients in plastics, bundling, changing over, composites, food handling, drug, compound handling, elastic, printing, general handling, and a lot more ventures. Our inventory is focused on having the largest in-stock used oil transfer system, portable and central chillers, pump tanks, cooling towers, blown film coolers, and cold climate coolers.

Used Hot Oil Temperature Control Unit is our Speciality, Industrial Equipment is our Expertise: Our clients rely on us for their Regloplas heat transfer oil systems and used die casting machinery needs, but we also offer used industrial and automation equipment such as auto ladles, reciprocating die sprayers, and extractors (dedicated and robotic). Brands we stock include ABB, Kuka, Fanuc, Kuka and Motoman robot, Toshiba, Rimrock, Snair, and Advance Products. We also carry all types of auxiliary equipment such as die temperature control units (hot oil units) from Regoplas, Sterlco, Mokon, QPC, Advance, Robamat, Advantage, Accutemp Equipment, Fulton.