Used QPC Hot Oil Temperature Control Unit #4457


:H0 2220 B24
:24 kW
:450 F
:50 F
:Beta Warehouse Canada
Request Quote
SpecificationsMetric show ImperialImperial  show Metric
Heater (per zone) 24 kW 24 kW
Pump Power 1.5 kW 2 hp
Temperature (max) 232.2 C 450 F
Temperature (min) 10 C 50 F
  • Positive displacement pump with internal bypass set at 100 PSI, belt driven by a 2 HP Motor
  •  1" Inlet and Outlet
  • Gate valves installed on to and from process lines
  • Purge system to remove trapped air and vapor from fluid during start-up
  • 9 gallon reservoir with low level indicator
  • 6.7 ft2 U-tube heat exchanger
  • Process pressure Gage
  • 24 kW Incoloy sheathed immersion heater, flanged and vertically mounted
  • Pressure switch prevents running of unit without pressurization of system
  • Safety thermostat for shut-down of element on over-temperature condition
  • Heater electrically interlocked to prevent operating if pump not running
  • 1/2" drain connection
  • NEMA 12 Electrical Enclosure with branch fusing
  • Full load amps: 60 at 480 Volts
  • 1/16 DIN microprocessor based temperature controller
  • Control Voltage 120V
  • Machine is ready for inspection and/or shipping
  • Technical data without obligation – subject to prior sale
  • Specifications and location are subject to change without notice


This Temperature Controllers model H0 2220 B24 is manufactured by QPC. Features include:

Hour Meter, Oil Flow Switch, Positive Displacement Pump with Forward/Reverse Feature.

This machine reference #4457 Temperature Controllers is currently located at our Beta Die Casting Equipment warehouse and is ready for inspection and shipping.

Product Overview

Temperature Control Units

  • Machine Manuals
  • Easy To Use
  • TCU
  • Easy To Use
  • Machine Manuals