Used QPC Hot Oil Temperature Control Unit #4460


:QPH0221 0E-248
:24 kW
:450 F
:50 F
:Beta Warehouse Canada
Request Quote
SpecificationsMetric show ImperialImperial  show Metric
Heater (per zone) 24 kW 24 kW
Pump Power 1.5 kW 2 hp
Temperature (max) 232.2 C 450 F
Temperature (min) 10 C 50 F
  • Positive displacement pump with internal bypass set at 100 PSI, belt driven by a 2 HP Motor
  •  1" Inlet and Outlet
  • Gate valves installed on to and from process lines
  • Purge system to remove trapped air and vapor from fluid during start-up
  • 9 gallon reservoir with low level indicator
  • 6.7 ft2 U-tube heat exchanger
  • Process pressure Gage
  • 24 kW Incoloy sheathed immersion heater, flanged and vertically mounted
  • Pressure switch prevents running of unit without pressurization of system
  • Safety thermostat for shut-down of element on over-temperature condition
  • Heater electrically interlocked to prevent operating if pump not running
  • 1/2" drain connection
  • NEMA 12 Electrical Enclosure with branch fusing
  • Full load amps: 60 at 480 Volts
  • 1/16 DIN microprocessor based temperature controller
  • Control Voltage 120V
  • Machine is ready for inspection and/or shipping
  • Technical data without obligation – subject to prior sale
  • Specifications and location are subject to change without notice

This Temperature controller unit is manufactured by QPC

This temperature controller unit made by QPC reference #4460 is currently located at our Canada Beta Die Casting Equipment warehouse and is ready for inspection and shipping.

Beta Die Casting Equipment is the largest buyer and reseller of used die casting machines and used die casting machinery in the world. Beta Die Casting Equipment also buys and sells industrial machines and automation equipment such as Die Cast Press, High Pressure Die Casting Machines, Cold Chamber Die Casting machines, Hot Chamber Die Casting Machines, Trim Press, Melting furnaces, Holding furnaces, Stack Melting Furnaces, Crucible Furnaces, Die Casting Ladles, Extractors, Multi-slide machines, Techmire Machines, Oil Temperature Controllers, Shot blast machines, Trimming Press, Die holders and other auxiliary equipment.

We sell all types of equipment such as cold chamber die casting and hot chamber die casting machines. We also offer aluminum die casting machinery, zinc high pressure die casting machinery, trim presses,  trimming presses, furnaces, automation, finishing, inspection and machining equipment. We stock European die casting machines made by Buhler, Idra, Italpresse, Frech, Weingarten, Colosio, Upre, Agrati, and Triulzi. From Asia, we stock die casting machines such as Toshiba, UBE, Toyo, Zitai, BSK, KDK, Producer, and LK. From the United States we stock die casting machines such as Prince, HPM, BuhlerPrince, Lester, B&T, THT, National, Birch, Kux. We also offer Canadian machines such as Techmire, Dynacast, Triad and Fishercast.

Product Overview

Temperature Control Units

  • Machine Manuals
  • Easy To Use
  • TCU
  • Easy To Use
  • Machine Manuals